The Ouija is Witchcraft´s dedicated freestyle board. The Ouija V2 was left unchanged from 2013 to 2017. The Ouija V3 has become shorter and wider with the volume moved back. There is also a new faster rockerline that provides more pop. The contoured deck shape in the strap area has remained the same for a more ergonomic stance. The Ouija V3 is more explosiv, rotates faster in the air, ideal for moves like the spinloop or Burner. The compact shapes also carve faster on the water which helps moves like Shakas or Konos, when you need to turn in the wind quickly. The increased volume in the tail makes that you plane earlier and have more pop. The faster rockerline accelerates faster and reaches a higher top end speed.
Since the choice of freestyle fins can be very personal and there are many aftermarket fin brands offering good freestyle fins, the Ouija comes without fin so the customer can buy the fin(s) he likes best. The Ouija fin box can take both slot and US box fins. We can also supply your new Ouija with the recommended Maui Ultra Fin freestyle fin against an aditional fee of 99 euros.
Since weight is essential to pop the board high out of flat water, the Full Custom Biaxial Carbon construction is super light yet considerably stronger than most freestyle boards. The durability/strength ratio is unmatched by anyone. This construction is custom build up from high grade, light weight unidirectional carbon so we can lay the fibres exactly into the direction of the most common forces in each area. Critical areas like nose and mast track area are reinforced. The fin boxes are our in in house made slot box type, molded directly into the board, using 4 screws to mount the fin. All boards come fitted with ergonomical straps which are mounted by 4 screws per strap to prevent twisting.<
The SDT construction comes in yellow, the CBC in luminous green and the FCBC in luminous red.
Since 2008, all the boards are being produced by our new, highly innovativ CAD/CAM production system. This allows us to step away from the model by year system, since any changes can be put through quickly without any further costs. We no longer have to wait till the new models are due NOR do we have to take hasty decisions if we would like to test longer……… With the introduction of the CNC system we can put through very minor changes and all lines and volumes are calculated by our shaping program. We have the same system in our R&D centre and custom board factory on Fuerteventura as well as the production board factory in Sofia, Bulgaria, to make sure what we design in Fuerte is the same board you can buy.
Early planing, upwind ability, manoeuvrability, drive, control at overpower. Higher average speed when you need it most. To give the highest performance.
Slightly higher top speeds, old school lean back sailing.
Inverted V bottom shape
Responsiveness, control and drive
medium pin tail.
Good mix of early planing, tight turning, smoothest behaviour
Manoeuvrability, speed, early planing, control, total grip, acceleration through the turn.
Planing, control and manoeuverability
|Ouija V3||Freestyle, single fin 4 screw slot box|
|Volume||length||width||Tailwidth OFO||construction||weight SDT||weight CBC||weight FCBC||Fin system||Fin||Sail range||SDT in €||CBC in €||FCBC in €|
|Ouija||80||2102||611||399||FCBC/SDT||5.9||5.6||5.3||slot box||without fin||3.2-5.0||1751||1839||2014|
|Ouija||86||2142||626||406||FCBC/SDT||6.2||5.9||5.6||slot box||without fin||3.2-5.0||1798||1888||2067|
|Ouija||94||2151||647||424||FCBC/SDT||6.5||6.1||5.8||slot box||without fin||3.5-5.2||1845||1937||2121|
|Ouija||102||2197||664||431||FCBC/SDT||6.8||6.4||6.1||slot box||without fin||4.0-5.8||1891||1986||2175|
|Ouija||110||2239||684||440||FCBC/SDT||7.1||6.7||6.4||slot box||without fin||4.5-6.2||1938||2035||2229|
|Ouija||118||2281||701||448||FCBC/SDT||7.4||7.0||6.6||slot box||without fin||5.0-6.7||1985||2084||2282|